Thursday, September 29, 2011

MXKEY v3.5 revision 1.3 - MEGA UPDATE - The only NOKIA BOX with TMA included


MXKEY v3.5 revision 1.3 - MEGA UPDATE - The only NOKIA BOX with TMA included

What is new added, changes and improvements:

- added USB STANDALONE security repair function *** for ALL HASH for RAPUYAMA phones.
( required HTI with firmware 00.17 )

- added USB STANDALONE security repair function *** for ALL HASH for RAPIDO phones.
( required HTI with firmware 00.17 )



420 Links to download MxBox/MxKey v3.5 rev1.3 for FREE



1. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

2. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

3. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

4. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

5. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

6. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

7. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

8. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

9. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

10. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

11. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

12. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

13. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

14. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

15. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

16. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

17. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

18. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

19. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

20. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

21. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

22. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

23. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

24. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

25. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

26. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

27. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

28. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

29. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

30. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

***
SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SIMLOCK REPAIR (PA_SL/PA_SL2)
NCK CALC (PA_SL/PA_SL2)
SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
SL3 NCK CALC (PA_SL3/PA_SIMLOC30)



- added: SL3 Logger (sl3u.exe - Standalone SL3 Logger/Unlocker/LOG Converter)
Optimized for SL3 unlock task using HTI or USB cable.






- added: SL3 Bruteforce (sl3bf.exe) 'load at windows startup' option.





- added, notification messages for important function




- added, optional screen recorder using separated application "camcl.exe", use "Record Session" on system menu
(right click window titlebar)
captured videos will be saved as "capture.avi" in the windows temp folder
will be usefull for reporting bug or something else






- added: connection status/speed information on connect





- moved "[BB5,USB]Use New Protocol for RAPIDO" option to config->Directory
If enabled, will use new loader else will use old loader(embedded to MCU file)
RAPIDO phones with New Protocol connected to HS(High-speed) USB allows to use CERT backup/restore.
Old RAPIDO and RAPIDO connected to non HS USB will not backup CERT due to USB limitation.





NEW ADDED

- added: model selection by type designator or phone description

- added, fw version check between connected phone, mcu image, server during 'Scan Phone'

- added, fw version check between selected mcu image and server during 'market select'

- added, "Copy All Links" on Nokia Download Window

- added, auto complete on Model selection

- added: more detailed description of errors if an error occurs

- added: "[BB5]Use New Protocol for RAP3Gv3" option to config->Directory

- added: phone`s image load from server(if any).

- added: latest firmware version check(if any) for BB5 phone on market select.

- added update dialog window when HTI firmware outdated.

BUG FIXED:

- bugfixed: Nomadik dead usb flashing (Bootstrap failed)

- bugfixed: RAP3Gv3 dead usb flashing (stop at sending bootloader)

- bugfixed: usb3 connection status query

- bugfixed: XGOLD 213 "Use Embedded SBL from MCU" does not work if BB5 selected in generation dropdown.

- bugfixed: access violation on synchronize files when Download window opened.

- bugfixed: application crash on load in some os(win7 x86 no sp).

- bugfixed: XGOLD213 usb flashing error when no mcu spesified

- bugfixed: SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: X1-01 XGOLD flashing bug.

- bugfixed: No progressbar on flashing.

- bugfixed: New RAPIDO SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: processing file with size more than 900MB.

- bugfixed: emulate phone on New Protocol causing application to be hang.

- bugfixed: random crash on buscheck with usb connection

- bugfixed: dead after flashing in NOR flash devices (affected on x64 pc with memory more than 4GB)



OTHER CHANGES IN IMPROVEMENTS

- Renamed 'Image DL' caption to 'Download' as this will be easier to understand

- 'Download' will show input dialog if no product code spesified

- local rfbb will also handle rfbb file format

- local dcc will also handle pm file format

- changed FlashLoader selection from dropdown to checklist as this will be more user friendly.

- changed SoftTMA to slider as this will be more user friendly.

- Some UI changes
Add fading on loading module using balloon hint instean of ordinary hint

- changed manifest of mobileEx.exe, SL3 Bruteforce (sl3bf.exe) from 'asInvoker' to 'requireAdministrator'.
Library and modules will need to update their xml configuration files regularly,
or create if xml configuration is not exists. This operation required admin level on vista and win7 core.

- to not confuse users, Nokia USB ROM is now displayed only when no physical NMWCD* device connected
for dead usb flashing, Nokia USB ROM should be used instead of 'Phonet' device
* NMWCD: Nokia Mobile Wireless Communication Devices

- improved auto enable RAPIDO "FUR Cold Boot" by usb hub information

- improved synchronize files routine, auto retry when download failed.

- improved GetFlashAddress and Custom Erase function
(not pooling phone after operation)

- improved *.default(config update) file handling

- removed experimental "run in main thread" bug caused app hang

- usb flashing routine improved

- usb connection handling improved

Wednesday, August 17, 2011

Nokia 1110 1110i 11112 LCD Display Complete Solution Ways

Nokia 1110,1110i,11112, LCD Display Complete Solution Ways

CHINA GSM Hardware Solution and Pin out Exe

CHINA GSM Hardware Solution and Pin out Exe

CHina Nktel A200 Hardware Charging Solution Ways

CHina Nktel A200 Hardware Charging Solution Ways

China G Five Keypad Solution Ways

China G Five Keypad Solution Ways

China Bad Charging Solution Repair China all MTK Phone

China Bad Charging Solution Repair China all MTK Phone

6303c nokia All Hardware Solution Factory

2220s nokia hardware Repair Solution EXE

Nokia 1280 1616 1800 Lcd display and light jumper solution

Nokia 1280 1616 1800 Lcd display and light jumper solution

Download

NOkia 1110 1112 1600 Without I.C Ringer Solution

NOkia 1110 1112 1600 Without I.C Ringer Solution
 

NOkia 1110 1112 1600 Charging Solution Repair

NOkia 1110 1112 1600 Charging Solution Repair

NOKia 1200,1208,1209, Mic ,Buzzer,Ringer,Speaker Solution Ways

NOKia 1200,1208,1209, Mic ,Buzzer,Ringer,Speaker Solution Ways

NOkia 1202 1203 White LCD Display Solution Ways

NOkia 1202,1203 White LCD Display Solution Ways

NOKia 1202 1203 1661 1662 Power Switch On/Off Solution Ways

NOKia 1202,1203,1661,1662 Power Switch On/Off Solution Ways

Nokia 1110 1110i 1112 Low Battery Solution

Nokia 1110,1110i,1112 Low Battery Solution

NOkia 1110 1112 1600 2310 2610 LCD Light Solution Ways

NOkia 1110,1112,1600,2310,2610 LCD Light Solution Ways

Nokia 1110 1110i 11112 LCD Display Complete Solution Ways

Nokia 1110,1110i,11112, LCD Display Complete Solution Ways

NOkia 1110 1110i 1112 1600 Mic Jumper Solution Ways

NOkia 1110,1110i,1112,1600 Mic Jumper Solution Ways
NOkia 1110,1110i,1112,1600 Mic Jumper Solution Ways

1110 Nokia Hardware All Solution

1110 Nokia Hardware All Solution
1.No network Low Signal
2.Power Switch on/off
3.not Charging
4.LCD no Dispaly
5.Local mode,test mode
6.Led No Backlight
7.Keypad not working
8.Insert sim Card
9.no on/off Dead Set

Nokia 1110 +1110 +1112 Keypad IC Jumper Solution Ways

Nokia 1110,1110,1112, Keypad IC Jumper Solution Ways
 

11.2 Mb Mobiles animated Wallpaper

1100 Nokia All Hardware Solution

1100 Nokia All Hardware Solution
1.no Network no Signal
2.LCD No Dispaly
3.Local mode Test mode
4.Insert Sim Card
5.Antenna Switch
6.Speaker
7.Dead and short board
8.not Charging
9.Mic Solution
10.All Solution
 
Download

MXKEY v3.5 revision 1.3 - MEGA UPDATE - The only NOKIA BOX with TMA included

What is new added, changes and improvements:- added USB STANDALONE security repair function *** for ALL HASH for RAPUYAMA phones.
( required HTI with firmware 00.17 )

- added USB STANDALONE security repair function *** for ALL HASH for RAPIDO phones.
( required HTI with firmware 00.17 )



420 Links to download MxBox/MxKey v3.5 rev1.3 for FREE



1. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

2. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

3. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

4. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

5. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

6. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

7. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

8. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

9. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

10. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

11. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

12. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

13. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

14. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

15. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

16. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

17. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

18. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

19. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

20. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

21. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

22. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

23. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

24. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

25. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

26. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

27. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

28. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

29. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe

30. 14 links for mobileEx_setup_v3.5_rev1.3_20110806.exe
***
SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SIMLOCK REPAIR (PA_SL/PA_SL2)
NCK CALC (PA_SL/PA_SL2)
SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
SL3 NCK CALC (PA_SL3/PA_SIMLOC30)

- added: SL3 Logger (sl3u.exe - Standalone SL3 Logger/Unlocker/LOG Converter)
Optimized for SL3 unlock task using HTI or USB cable.






- added: SL3 Bruteforce (sl3bf.exe) 'load at windows startup' option.





- added, notification messages for important function


- added, optional screen recorder using separated application "camcl.exe", use "Record Session" on system menu
(right click window titlebar)
captured videos will be saved as "capture.avi" in the windows temp folder
will be usefull for reporting bug or something else






- added: connection status/speed information on connect





- moved "[BB5,USB]Use New Protocol for RAPIDO" option to config->Directory
If enabled, will use new loader else will use old loader(embedded to MCU file)
RAPIDO phones with New Protocol connected to HS(High-speed) USB allows to use CERT backup/restore.
Old RAPIDO and RAPIDO connected to non HS USB will not backup CERT due to USB limitation.






NEW ADDED

- added: model selection by type designator or phone description

- added, fw version check between connected phone, mcu image, server during 'Scan Phone'

- added, fw version check between selected mcu image and server during 'market select'

- added, "Copy All Links" on Nokia Download Window

- added, auto complete on Model selection

- added: more detailed description of errors if an error occurs

- added: "[BB5]Use New Protocol for RAP3Gv3" option to config->Directory

- added: phone`s image load from server(if any).

- added: latest firmware version check(if any) for BB5 phone on market select.

- added update dialog window when HTI firmware outdated.


BUG FIXED:

- bugfixed: Nomadik dead usb flashing (Bootstrap failed)

- bugfixed: RAP3Gv3 dead usb flashing (stop at sending bootloader)

- bugfixed: usb3 connection status query

- bugfixed: XGOLD 213 "Use Embedded SBL from MCU" does not work if BB5 selected in generation dropdown.

- bugfixed: access violation on synchronize files when Download window opened.

- bugfixed: application crash on load in some os(win7 x86 no sp).

- bugfixed: XGOLD213 usb flashing error when no mcu spesified

- bugfixed: SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: X1-01 XGOLD flashing bug.

- bugfixed: No progressbar on flashing.

- bugfixed: New RAPIDO SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: processing file with size more than 900MB.

- bugfixed: emulate phone on New Protocol causing application to be hang.

- bugfixed: random crash on buscheck with usb connection

- bugfixed: dead after flashing in NOR flash devices (affected on x64 pc with memory more than 4GB)



OTHER CHANGES IN IMPROVEMENTS

- Renamed 'Image DL' caption to 'Download' as this will be easier to understand

- 'Download' will show input dialog if no product code spesified

- local rfbb will also handle rfbb file format

- local dcc will also handle pm file format

- changed FlashLoader selection from dropdown to checklist as this will be more user friendly.

- changed SoftTMA to slider as this will be more user friendly.

- Some UI changes
Add fading on loading module using balloon hint instean of ordinary hint

- changed manifest of mobileEx.exe, SL3 Bruteforce (sl3bf.exe) from 'asInvoker' to 'requireAdministrator'.
Library and modules will need to update their xml configuration files regularly,
or create if xml configuration is not exists. This operation required admin level on vista and win7 core.

- to not confuse users, Nokia USB ROM is now displayed only when no physical NMWCD* device connected
for dead usb flashing, Nokia USB ROM should be used instead of 'Phonet' device
* NMWCD: Nokia Mobile Wireless Communication Devices

- improved auto enable RAPIDO "FUR Cold Boot" by usb hub information

- improved synchronize files routine, auto retry when download failed.

- improved GetFlashAddress and Custom Erase function
(not pooling phone after operation)

- improved *.default(config update) file handling

- removed experimental "run in main thread" bug caused app hang

- usb flashing routine improved

- usb connection handling improved


X6 NOKIA Solution Manual Schematics

Sunday, January 30, 2011

Nokia 3110c 6300 PA Jumper 100% tested

Nokia 3110c 6300 PA Jumper 100% tested 

Reset Nokia Memory Card Password 2 Minutes "Tutorial"

Reset Nokia Memory Card Password 2 Minutes "Tutorial"
We usually set password for our memory card for privacy and security, but the common mistake every one does at least once in out life time forgetting password. If you set password for mobile memory card, then you should be not forget the password. If you does then the only option is to formate your memory card with the help of the card reader and eventually the loss of all your data stored on it. There is a way to break the security wall. If you are a Symbian device lover then no need to worry about the password. You can crack them in few minutes.

In this tutorial I am going to teach you how to reset your memory card password in easy step. Before we start you need to have X-plore (application used to explore your system files and folder even the hidden folders in your device)

Step1: Install X-Plore in your mobile. If you want to download X-Plore search around internet you can download free trail.
Step2: Open your X-plore apps and Press 0(Zero) and check which you have marked the "show the system files"
Step3: Once you done that now go to the following path C:/Sys/Data/Mmcstore
Step4: Once you reached there you need to press "3" under option to set it in the Hex-viewer
Step5: See the third column you will able to see a line of code ! TMSD02G (c??"?x???6?2?6?2?6). Just check the character between the "?" it is your password ie: 62626

Note: If you have not set the password, then you will not able to gain access to C:/Sys/Data